• Measure width & length of quilt top in inches across the middle Ex: W =69" L =89"
  
• Multiply length X width = Total Sq. Inches
  Divide total square inches by 1296 to get the Square Yards of your quilt top
  Multiply by the quilting level you prefer.
• Examples:
  • 69" X 89" =6141/1296 = 4.74 Sq Yds
  • For Light Density Pattern: 4.74 X $24 = 109.02 + additional items + tax

RUSH REQUESTS - $45
We strive to keep our leadtime to 3-4 weeks. If you need your quilt by a date within 1-2 weeks, then the $45 fee is applied.

Proper Preparation will save us time and you money. By following the preparation steps below, you can avoid time delays and add-on charges.

1. Press your quilt top and backing thoroughly.
2. Place a safety pin at the top of both the quilt and backing fabric.
3. If you pre-wash your fabrics, pre-wash all of them.
4. Clip all loose threads from the back and front of the quilt top.
5. Square up backing fabric. (See Backing Preparation)
6. Size your backing a minimum of 6" longer & wider than your quilt top.
7. Do not baste, pin, or tack your quilt together. Simply fold each piece.
8. Be sure to remove salvage edges when piecing backing fabric (at seam only), please leave other salvage edges.
9. Be aware that fullness and puckers, which have been pieced in, cannot be quilted out.

If wide back is used, please press thoroughly ... wide backs tend to have creases in them.

If piecing the back, place the seam horizontally vs. vertically (unless fabric is directional). Vertical seams can cause tension issues.

Remove salvage edges on pieces to be seamed - use 1/2" seam and press open.
Please make sure backing is square.

**Example applies vertically as well

The same applies to "pieced backing", if using large pieces of fabric to create backing, please make sure to square up and make it 6" longer and wider than quilt top.